Outdoor Power Equipement

Maintaining the beauty of your lawn or garden is one of the most challenging tasks these days. A garden is one of the most important part and centre of attraction of each and every house or office. Therefore, maintaining the beauty of your lawn or garden is very important.

They consist of sharp rotating blades which cuts the grass finely and evenly. The blades of ride on mowers are placed in such a way that they cut the grass at an even height. Their cutting blades are built and installed together and are used in a horizontal motion. They provide you well trimmed lawn or garden where the grasses are consistent all over. Overall, they are undoubtedly one of the best gardening tools widely used all over the world.

When working in a garden it is important to ensure that the hedge trimmer you are using does its work effectively and in one go. However, prolong use of hedge trimmers often make their blades blunt and ineffective. Naturally, if you are using the machine frequently the blades will turn blunt down the road. You cannot prevent it but of course you can sharpen the blades time to time, depending on the frequency of their uses. Here is a stepwise procedure to sharpen hedge trimmer blades.

These steps are only applicable on hedge trimmers having blades fixed with bolts. If your trimmer doesn’t have bolts, it means the machine is not meant for servicing and you need to replace it with a new one.

Are you planning to buy or rent a mower? Be aware! Dealers just need a chance and they can rip off you. It is not always that dealers intentionally do this, but at time it is we who allow them to charge us more than what is deserved. We allow them every time when we lack knowledge or fail to explain what we actually need.

While buying mowers, if you don’t know the terms or details you want to buy, it is fairly tough to get desire deal. Most often, we reach a mower store without gathering enough knowledge about mowers and end up buying products that either more featured than what is required or far less than the requirements. It is not always dealer’s fault who the sell us wrong products that either proved to be over performer or under performer. This is result of our inability to explain what we are looking for and react to the suggestions given by the sales person. After all, they can suggest for the best, but decision is always yours.

Next, you allow dealers to rip off you when you hire a mower without preparing your garden. If you first get the delivery of mower and then clean up your garden to prepare them for mowing, it would take much time. This way you will be paying for unnecessary hours that you just wasted on cleaning up your lawn in renting hours. If you clean and prepare your garden before you get the delivery of mower, you will be saving time and money both.

These are just simple but common mistake we make while buying or renting mowers that give dealers chance to charge us more than what it fair. The next time when you plan to buy or rent mowers, keep these things in mind and save your valuable money. 

Over the lifetime of your mower, you will find it necessary to check over the blades for damage and bluntness and will occasionally need to remove them for sharpening or even replacement. It can be difficult, however, to put the blades back onto the machine correctly – many people are known at attach them upside down, causing the mower to cut improperly. So, how can you tell whether the blades have been put on correctly or not?

If replacing the blades entirely, thoroughly scrutinize the new ones before attaching them to the underneath of the mower. Look for stamped or etched words on the face of the blade saying something like “Towards grass” or “This side down”. Most newer blades are made like this to avoid any confusion.

If you cannot find a stamping or etching, or you are putting the old blades back onto the mower after sharpening them, you will need another way to tell which is the right way. Scrutinize the blade until you locate the cutting edge and follow it until you come across the dull trailing edge – a bend in the blade that points toward the underneath of the mower.

Making sure that you are holding the blade in the way that it needs to be installed, slide it onto the shaft on the underneath of the mower. If it rocks, check that it is settled on the shaft properly, then secure it into place with a socket wrench. Put the mower back onto all four wheels and take a look at the angle of blade. You could even give it a trial run to see how it goes. 

If you have ever planned to buy a mower you might have a huge assortment of mowers which rather simplifying your choice perplex your decision making. Of course, choosing a single mowing machine from such a huge variety is no joke, especially when you want value for your money. If you too have stuck in such situation here is how you can overcome it.

Ride on mowers is the most preferred choice for large lawn maintenance in summers. Reasons, it save manual labor and provides better precision. There are different types and sizes of ride on mowers which are used to maintain small and large lawns, but users often in craze of using them overlook the safety precautions that are though basic but very important. Here are some lists of those:

Empty the fuel chamber at the end of the mowing season and add new fuel at the start of the spring.